China Automatic Foam EPS Cutting Machine supplier manufacturer - Longwell EPS mold

 

China Longwell EPS mold is a professional Automatic Foam EPS Cutting Machine supplier, manufacturer, factory. The products are exported to dozens of countries and regions. Welcome more new and old customers to call or email for consultation.

 

EPS Cutting Machine

 

The EPS Cutting Machine is a sophisticated tool that can easily cut through most materials. This machine is perfect for professionals who need to make precise cuts with little effort. Additionally, the EPS Cutting Machine is very durable, making it a great choice for businesses who require quality workmanship.

 

China Longwell EPS mold is a professional EPS Cutting Machine supplier, manufacturer, factory. The products are exported to dozens of countries and regions. Welcome more new and old customers to call or email for consultation.

 

EPS Cutting Machine is to expand EPS raw material to required density, the machine works in a continuous way both in taking raw material and discharging expanded material.

 

EPS Cutting Machine can do second and third expansion to get low density.

 

Machine complete with Screw Conveyor, First and second expansion loader, Expander, Fluidized bed Drier

 

Application of EPS Cutting Machine

 

The fat barrel, outside an all-stainless steel compartment, has insulation measures, reliable performance, reasonable structure, beautiful, stable quality, high production efficiency, increase 2-3 times than the average machine, low energy consumption 25%.

 

The EPS Cutting Machine feed system including a feeding device and the second feeding device, a feeding device by adjusting the feed rate of transmission in order to ensure a stable feed.

 

EPS beads through the material, the foam into the fluidized bed dryer ( customer optional ), and then into the aging silo through the fan delivery device, complete raw foaming process, process cycle according to the second foam.

 

The EPS Cutting Machine produced a more uniform density can foam density of 7-35kg/m3.

 

Let the steam valve, the user can choose according to need.

 

China Automatic Foam EPS Cutting Machine

 

The automatic foam EPS cutting machine is a modern and efficient tool that can help businesses save time and money. This machine is perfect for cutting foam boards, and can cut them quickly and easily. Thanks to its automated design, this machine is easy to use and can produce high-quality cuts without any hassles.

 

Advantages of Automatic Foam EPS Cutting Machine

 

Efficient: The Automatic Foam EPS Cutting Machine can quickly and easily cut EPS foam.

Safe: The machine is equipped with safety features to protect you and the machine.

Precise: The machine is accurately calibrated to ensure accurate cuts.

Fast: The machine can quickly generate high volumes of foam.

Economical: The Automatic Foam EPS Cutting Machine is affordable and easy to operate.

 

How to Maintain Auto Cutting Machine

 

Careful maintenance is required before or after using cutting machine,

which can prolong the service life of the auto cutting machine.

So how to maintain it?

This article will introduce this knowledge to you.

 

1. It is required to regularly remove the waste in the collection box to prevent too much waste from blocking the air outlet;

 

2. It is required to clean the cutting machine regularly every day, remove the sundries on the table, stopper and guide rail, and spray lubricating oil on the guide rail;

 

3. Clean the chiller regularly every half a month, drain the dirty water in the machine, and then replace it with new purified water;

 

4. The indoor environment will have a certain impact on the service life of the machine, especially the humid and dusty environment. The wet environment is easy to rust the reflecting lens, and also easy to cause problems such as circuit short circuit or laser discharge ignition;

 

 

5. The reflector and focusing lens shall be scrubbed with special cleaning solution every 6-8 hours. When scrubbing, it shall be scrubbed counterclockwise from the center to the edge of the focusing lens with a cotton swab or cotton stick dipped in the cleaning solution. At the same time, the lens shall be scratched carefully.

 

Matters needing attention in repairing foam cutting machine

 

At present,  laser machine is widely used in various fields due to its advantages of laser beam fine cutting, not easy to deform, smooth incision and no paste edge

Of course, It is inevitable that the machine will break down during use and need maintenance in the foam cutting. Now let's talk about it.

 

Precautions during maintenance under:

 

 

Only those who know how to use and operate are allowed to repair machinery or replace components! In order to prevent accidents or damage to machinery, the following principles must be observed during maintenance:

1. In case of failure, disconnect the power supply to stop the machine;

2. When the machine cannot be used normally, consult relevant manuals and operation instructions to determine the correct measures to be taken; Turn off the power supply before repairing or replacing components;

3. The parts (components) removed during maintenance shall be replaced with the same new parts (components) in situ, and the instruments used in maintenance must be calibrated;

4. It is forbidden to leave inflammables or metals in the electric cabinet or junction box;

5. Regularly check whether cables and wires are damaged to prevent electric leakage or electric shock.